You may need to rescan to ensure that the repairs were effective. Replace the drive if the error repeats. Re-test Drive 148 Not Selected Drive not selected. The drive has not responded back in the time allotted. Check This Out
SMART capabilities: (0x0003)Saves SMART data before entering power-saving mode. use the second link above to find the proper utility, or contact WD tech support if that fails... If Selective self-test is pending on power-up, resume after 0 minute delay. Check Floppy and use appropriate diagnostic utility 209 Self Test Failed To Run SMART Self Test failed to start when executed.
If Selective self-test is pending on power-up, resume after 0 minute delay. The drive may not have been accessed properly possibly due to a bad connection. Re-Test Drive 9 Write Sector Failure A write command during the test has failed.
Retest after checking the connections. Replace the drive if the error repeats. Register now! Test complete Defect Free Now, can I assume that the hard drive is now fine, and more errors won't crop up in the future?
The information file, which holds the data pertaining to this drive, is corrupted or missing. Western Digital Error Code 0007 Retest after checking the connections. Drive should be replaced. http://support.wdc.com/KnowledgeBase/index.aspx?s=Data+lifeguard+diagnostics&lang=en Drive should be replaced.
You may also want to reroute your IDE cable away from sources of electronic bus noise such as your CPU, Power Supply, etc. Error: (10/03/2014 08:24:02 PM) (Source: ESENT)(User: ) Description: wuaueng.dll3752SUS20ClientDataStore: F:\WINDOWS\SoftwareDistribution\DataStore\Logs\edb.log-1032 (0xfffffbf8) Error: (10/03/2014 08:24:02 PM) (Source: ESENT)(User: ) Description: wuauclt3752F:\WINDOWS\SoftwareDistribution\DataStore\Logs\edb.log-1032 (0xfffffbf8)32 (0x00000020)The process cannot access the file because it is being It also may be due to a defective connection. Re-test Drive 163 Unknown Error Queued command timed out.
This may be due to a media error. https://community.wd.com/t/smart-error-help/8367 Please contact the system vendor for the above-mentioned information. Wd Error Codes What is the best program for performing a low-... Data Lifeguard Diagnostic For Dos Please contact the system vendor for the above-mentioned information.
Roger ____________________________ MiniToolBox by Farbar Version: 21-07-2014 Ran by RK (administrator) on 04-10-2014 at 18:37:46 Running from "F:\Documents and Settings\RK\My Documents\Downloads" Microsoft Windows XP Professional Service Pack 3 (X86) http://maxspywareremover.com/error-code/what-are-the-error-codes-for-ps3.php SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail If the error repeats, replace the drive. Conveyance Self-test supported. Western Digital Support
Replace Drive 211 2-9 Uncorr ECC Errors Error Correction Code (ECC) 2 through 9. The printer may not be attached or turned on. If you accept cookies from this site, you will only be shown this dialog once!You can press escape or click on the X to close this box. http://maxspywareremover.com/error-code/western-digital-data-lifeguard-error-code-0007.php SCT capabilities: (0x3037)SCT Status supported.
An interrupt command to perform a specific task failed to complete. Several instances of information on data positioning and location could not be found. Is there anything that suggests a serious problem with this hard drive?
Several instances of track information could not be found. Selective Self-test supported. Replace your cable and retest the drive. Drive should be replaced.
Error: (10/04/2014 09:54:43 AM) (Source: Microsoft Antimalware) (User: ) Description: The support for your operating system has expired. Replace the drive if the error repeats. Replace the drive if the error repeats. http://maxspywareremover.com/error-code/wii-wfc-error-codes.php This is the pretest initialization code which indicates a drive is ready to be tested, but has not yet been tested.
SCT Feature Control supported. It may also be due to a defective connection. Replace Drive 163 Unknown Error Queued command timed out. Replace the drive if the error repeats.
Error: (10/04/2014 09:54:43 AM) (Source: Microsoft Antimalware) (User: ) Description: The support for your operating system has expired. Re-test Drive 139 DRQ NOT EXPECTED The drive did not properly respond to test commands. Does it tell you anything? Maybe yes, maybe no.