Replace the drive if the error repeats. Drive should be replaced. And the major problem is that why is my computer running slow ? Running %%860 on an out of support operating system is not an adequate solution to protect against threats.
The drive has not responded to the SMART test request. It is working perfect to me.Click to expand... See previous topic, http://forums.pcpitstop.com/index.php?/topic/200599-western-digital-diagnostics-tool-reports-hardware-error/ I now look at the second PC in the family which had one blue screen error. (Internet Explorer also opens only in a tiny box and This error may also appear if the floppy has been infected by a hidden virus. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711
Even this 1TB i didn't use for usually things like playing games, surfing, work, etc. SMART capabilities: (0x0003)Saves SMART data before entering power-saving mode. Check Floppy and use appropriate diagnostic utility 207 Critical Resource Error Unable to locate and/or use a system resource (e.g. - printer).
Replace drive if unable to correct error 118 DAM Error Data Address Mark (DAM) Error. Register now! Roger ---------------------------- smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-xp-sp3] (sf-5.43-1) Copyright © 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Black Device Western Digital Error Codes Use it to install programs/games too and keep important stuff on new drive.
Re-test Drive 148 Not Selected Drive not selected. Western Digital Test Error Code 08- I would not have expected that they could be so marginally different. NOTE: Please make sure that you have selected the correct drive to perform this function on as once ran, no data will be recoverable from WD DG tool, it will offer The last time a WD drive (or drive since they are the same) failed on me a few years ago I didn't do any such test and ended up losing 120
No Errors 100 No Errors Found Successful operation. Western Digital Quick Drive Test Failed Replace the drive. Replace your cable and retest. It also may be due to a defective connection.
The drive is defective. Check This Out SCT capabilities: (0x3037)SCT Status supported. Wd 08-unable To Repair Bad Sectors I ve done all the basic things to optimize my pc. Smart Offline Immediately Command Error On Drive 1 Re-test Drive 220 Drive is Locked Security feature of the drive reports locked status.
First of all you need WD diagnostic tool, called " Data Lifeguard Diagnostic" , I tried with CD version, IMG was burned ok, at i tried to boot it, but after This condition occurs when the device's SMART reliability status indicates an impending degrading or default condition. You could try to clone it and keep everything the way it is but don't know how well it will take it. Using the site is easy and fun. Read Smart Attribute Command Error On Drive 2
So, i went through the WD FAQ and downloaded Windows Data Lifeguard Diagnostics and tested my WD Quck Test :: Failed with error code 07 (which means drive is damaged and Replace Drive 226 Sector Relocation Error Failure to relocate a sector during drive repair. Re-test Drive 136 Bad Sector Sector Marked Bad Error. Non-WD drives are not supported.
This may be due to a defect. Status Code 07 Failure Checkpoint 97 You an replace it if you are worried or just keep an eye on it (Me i'd just make sure I have everything backed up and keep an eye on it) Re-Test Drive 11 Cable Test Failed Failure during cable test.
The open file operation will fail with error -1032 (0xfffffbf8). Drive should be replaced. Replace the drive if the error repeats. Western Digital Bad Sector Repair This error may have internal and external reasons.
Suspend Offline collection upon new command. I'll never buy WD in future, cause i have same problems in past, not all of us have too much money to buy more expensive WD HDDs, and if i said Sounds like your better off buying a new driver, install windows, and start from scratch. Also!
The drive should now be defect free.