Retest after checking the connections. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Replace Drive 357 DAM 2-9 Data Address Mark. Drive should be replaced. Check This Out
This may be due to a media or read error. It also may be due to a defective connection. Join Date Jun 2001 Location Albuquerque, NM USA Posts 14,686 Thanks, Midknyte and SuperSparks. Re-test Drive 141 UNKNOWN ERROR An unknown error has occurred during testing. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711
Jim WIN7 Ultimate SP1 64bit, IE 11, NTFS, cable, MS Security Essentials, Windows 7 firewall Reply With Quote April 15th, 2010,02:56 PM #2 Midknyte View Profile View Forum Posts StArK RaVinG Unfortunately, a hard drive, which develops errors will always have tendency to do it again. Just because that passes, don't assume the drive is good.
Edited by guman0v, 14 March 2010 - 07:05 PM. No. Replace Drive 211 Self Test Never Completed The drives internal self-test could not complete due to unrepairable errors. Please re-test the drive with Data Lifeguard.
Data request has timed out when writing to the drive. Western Digital Error Code 0007 Several instances of information on data positioning and location could not be found. status says that is zero remaps, so I have no clue what the error could be here. https://hardforum.com/threads/wd-diagnostics-error-code-223.1300005/ Back to top #8 guman0v guman0v Topic Starter Members 18 posts OFFLINE Local time:04:19 AM Posted 14 March 2010 - 08:44 PM I've heard about sata cables causing trouble; not
We did have a momentary power surge/outage about two days ago in the neighborhood. If ECC occurs, use Data Lifeguard for additional error correction. Re-test Drive with appropriate diagnostic utility 204 Missing Log File The log file that existed at startup of diagnostic utility has been moved or no longer exists. I decided to run Chkdsk manually again later this AM, this time checking the "Scan for and attempt recovery of bad sectors" box in addition to the default "Automatically fix files
Re-Test Drive 258 ECC 10+ Error Correction Code. original site Site Changelog Community Forum Software by IP.Board Sign In Use Facebook Use Twitter Need an account? Western Digital Error Codes Extended self-test routine recommended polling time: ( 231) minutes. Hot Network Questions Why can't the second fundamental theorem of calculus be proved in just two lines?
What do I do now? his comment is here Re-test and Repair Option diagnostic utility 212 10+ Uncorr ECC Errors Error Correction Code (ECC) 10+. P.S. Replace the drive if the error repeats.
Re-test Drive 201 Non-WD Drive The drive does not have a WD serial number. So far every extended test I've run to date completes with error code 0223. It may also be due to a defective connection. this contact form Which exercises a cyclist should do before/after any ride?
Re-Test Drive 17 Erase SSD Failure A write command during the test has failed. Re-test Drive 163 Unknown Error Queued command timed out. Replace the drive if the error repeats.
It's like hard drive cancer. Several instances of information on data positioning and location could not be found. Replace Drive 213 2-9 DAM Errors Data Address Mark (DAM) 2-9. Just because a sector has been reallocated does not mean that the data in the bad block it was successfully recovered, meaning every file you put on the disk is potentially
As well as the HD being corrupt, telling me to run chkdsk. Re-Test Drive 102 Seek Timeout A Seek command did not complete in the time allotted for its completion. Re-Test Drive 112 IRQ Timeout Interrupt ReQuest Interrupt signal not received. navigate here WDC Support Downloads Knowledge Base Product Registration Warranty Services Contact Ask a Question Contact Support Feedback Other Sites MyCloud.com Online Learning Center CONNECT WD Blog © 2016 Western Digital Technologies, Inc.
Drive should be replaced. Check Floppy and use appropriate diagnostic utility 209 Self Test Failed To Run SMART Self Test failed to start when executed. It also may be due to a defective connection. Computers with S.M.A.R.T.
If you try to RMA the drive, they might ask you for the error code from the diag program. An error was reported by the drive during the Write command (to cause the auto-relocation) or the Read Verify command (to verify the relocation happened). Drive should be replaced. I would be happy if the drive would reallocate these sectors, but going by smart status it is not doing that.
The drive has not responded in the time allotted. Would the bad sector problem be caused by something to do with HD cables? One instance of track information could not be found. The drive should now be defect free.
Check cabling & retest. An interrupt command to perform a specific task failed to complete. You can not be assured that with any drive brand new or 5 years old. Replace the drive if the error repeats.
Some vendors use the security feature to ensure the usage of only specific drives in their system, or the drive may have been locked by a user using a third party disabling AHCI or whatever). Join Date Jun 2001 Location Albuquerque, NM USA Posts 14,686 Bad Sectors Upon boot this AM, my less than four month old PC decided to run a Chkdsk on its own. There may be media errors present on this drive.
Retest after checking the connections. Please ensure that you are not loading any other DOS level files from the floppy prior to running diagnostic utility. If ECC occurs, use Data Lifeguard repair option for additional error correction. Replace the drive.