Home > Western Digital > Wd Test Error Code 08

Wd Test Error Code 08

Contents

karthik24sOct 19, 2014, 4:40 AM Agera One said: Hard disk drives has platters. Replace Drive 225 Too Many Errors Found Error count reached a threshold value. Replace Drive 226 Sector Relocation Error Failure to relocate a sector during drive repair. The drive has not responded back in the time allotted. http://maxspywareremover.com/western-digital/wd-extended-test-error-code-08.php

I even made an image of the drive and got everything except the three stubborn sectors. It also may be due to a defective connection. Extended self-test routine recommended polling time: ( 100) minutes. Drive should be replaced.

Unable To Repair Bad Sectors

This may be an anomaly. The Identify Drive Command has not received an acceptable response from the drive. Replace the drive if the error repeats. Drive should be replaced.

Replace Drive 161 RESET SIGNATURE The drive did not properly respond to test commands. I tried booting in safe mode, but it would freeze at crcdisk.sys and restart. When I attempt to access (open/delete) that document, it resulted in an IO error or file access got stalled . Read Smart Attribute Command Error On Drive 2 The failure to complete the test indicates a failed drive.

Last year there was some concern about a few stubborn bad sectors that couldn't be reallocated. Smart Offline Immediately Command Error On Drive 1 Quick SMART Status :: PASSEDQuick Drive Test :: FAILEDComplete Drive Test :: Did not run the test. Suspend Offline collection upon new command. his explanation So no luck for a repair install.

Remove Advertisements Sponsored Links TechSupportForum.com Advertisement 10-26-2009, 04:09 PM #2 raptor_pa TSF Enthusiast Join Date: Dec 2008 Location: Central PA Posts: 10,227 OS: XP First of all Status Code 07 Failure Checkpoint 97 This may be due to a media error. Also! Processing media-specific event for [explorer.exe!ws!] Error: (08/20/2014 03:03:09 PM) (Source: ESENT) (User: ) Description: wuaueng.dll (768) SUS20ClientDataStore: Error -1032 (0xfffffbf8) occurred while opening logfile F:\WINDOWS\SoftwareDistribution\DataStore\Logs\edb.log.

Smart Offline Immediately Command Error On Drive 1

Password Site Map Posting Help Register Rules Today's Posts Search Site Map Home Forum Rules Members List Contact Us Community Links Pictures & Albums Members List Search Forums Show Threads https://community.wd.com/t/smart-error-help/8367 You could try to clone it and keep everything the way it is but don't know how well it will take it. Unable To Repair Bad Sectors Contact System Vendor 221 Test Not Supported Certain older drives do not support certain SMART Self Tests. Western Digital Quick Drive Test Failed HAHA Dr tweak posted almost at the same time.

Total time to complete Offline data collection: ( 8400) seconds. http://maxspywareremover.com/western-digital/western-digital-extended-test-error-code-08.php File record segment 30698 is unreadable. Check your floppy and retest. The bad thing is that the HDD is unresponsive to most the the software/utilities(even the chkdsk) and you may need to back up as much as you can of your data Western Digital Error Codes

The drive has not responded to the SMART test request. It will only fail. Re-test with appropriate diagnostic utility 228 DRIVE IS LOCKED-DST FAIL Security feature of the drive reports locked status. this contact form Replace Drive 3 SMART Attribute Read Failure Self-Monitoring, Analysis, and Reporting Technology (SMART) attribute read failure.

It also may be due to a defective connection. Western Digital Bad Sector Repair Here are the results :-SMART Status is OK.Test Option: EXTENDED TEST Model Number: WDC WD5000AAKX-001CA0 Unit Serial Number: WD-WMAYUS221377 Firmware Number: 15.01H15 Capacity: 500.11 GB SMART Status: PASS Test Result: FAIL Re-Test Drive 101 Unknown Error An unknown error has occurred during testing.

solved 3 hdd die in a month solved HDD's die in pairs?

It will only fail. Track 0 also holds information about the drive. Error logging capability: (0x01) Error logging supported. Too Many Bad Sectors Detected Retest after checking the connections.

Sure, i didn't say that just cause i had problems, cause that wasn't really problem for me, but for average user that will be really problem to find alternative to run Bad Sectors, PCB Failure, Read/Write Head failures. Selective Self-test supported. navigate here No other temporary/easy way.

Use the appropriate version. There could be media errors present on this drive. Re-Test Drive 556 SERVO 1 SERVO is data on track location. Replace the drive if the error repeats.

Check Floppy and use appropriate diagnostic utility 209 Self Test Failed To Run SMART Self Test failed to start when executed. Replace the drive if the error repeats. Re-test with appropriate diagnostic utility 222 Drive Failed the Test Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command. Re-Test Drive 105 BUSY GLITCH The drive did not properly respond to test commands.

The drive is defect free. This may be an anomaly. Re-test Drive 201 Non-WD Drive The drive does not have a WD serial number. Test Time: 06:40:53, August 20, 2016 Test Option: WRITE ZEROS Model Number: WD Elements 10B8 Unit Serial Number: [Deleted-Privacy]Firmware Number: 1012 Capacity: 2000.37 GB SMART Status: Not Available Test Result: FAIL

Drive should be replaced. This may be an anomaly or a defect with the drive. or email...have some patience Nesvic 2012-01-19 19:11:48 UTC #5 The WD Community was created for Users, such as yourself, to help one another, and to share your experiences and ideas with Track 0 on the drive must be accessed to perform parts of various internal tests.

But, any idea why my harddisk is perfectly working on TV ? hooray, now to fix all the new problems cropping up « Refusal to start up XP after a Microsoft Update! | Hdd lock bay password » Thread Tools Show Printable The HDD stores it randomly over the entire storage. (that's why the HDD platters spins while doing work, the needle detects where the data are stored along the rotating platters. If ECC occurs, use Data Lifeguard repair option for additional error correction.

Replace Drive 550 Abort Cmd Abort Command. It also may be due to a defective connection. Stay logged in Hardware Heaven Forums Home Forums > Hardware and Related Topics > Hardware Discussion & Support > Home Forums Forums Quick Links Search Forums Recent Posts Members Members Quick