Home > Western Digital > Western Digital 0132 Error

Western Digital 0132 Error

So then a few restarts and I could no longer see it anywhere. Create and use a new DLG Tools diskette. Re-Test Drive 210 Self Test Failed The drive's internal self-test reported unrepairable errors. It may also happen when the wrong version of diagnostic utility is used. weblink

A number of ECC errors (between 2 through 9) have been detected. Commit interval 5 seconds[ 85.990807] EXT3-fs: mounted filesystem with ordered data mode.[ 97.002795] ata1.01: status: { DRDY ERR }[ 97.002837] ata1.01: error: { ABRT }[ 97.025711] ata1.00: configured for UDMA/100[ 97.034414] Re-test Drive 213 2-9 DAM Errors Data Address Mark (DAM) 2-9. The snag comes when you leave it off for awhile or have a power surge or loss or it doesn't boot up right somehow....that's where havoc sets in. http://www.techsupportforum.com/forums/f16/solved-what-is-error-status-code-0132-from-data-lifeguard-diagnostics-537960.html

Last edited by terrannova; March 1, 2010 at 17:16. use the second link above to find the proper utility, or contact WD tech support if that fails... As God is my bloody witness, I'm hell-bent on making it work." -Elon MuskShivahn wrote:I am a motherfucking sorceror. So then I tried new ribbon cables and tried running it stand alone in the pc and still nothing...

Drive should be replaced. Check Floppy and use appropriate diagnostic utility 207 Critical Resource Error Unable to locate and/or use a system resource (e.g. - printer). Replace the drive if the error repeats. Track 0 also holds information about the drive.

When plugged in, it definitely spins up, but the LED just blinks continuously; Windows recognizes it as a USB drive, but can't find any partitions on it.I decided to open up The drive has not responded in the time allotted. Return to Top Data Lifeguard Tools 11 and 10 Error Codes Note: If the same error code is encountered more than once after re-testing, please Contact Us for additional assistance. If the drive were installed new, and errors are indicated, it may be that the BIOS isn't up to date as far as the drive's cylinder count status.

Re-Test Drive 115 ICRC Error Ultra DMA CRC error. Boot Manager missing or Dead HDD? The failure to complete the test indicates a failed drive. If the automatic repair feature is unable to repair these errors, replace the drive.

The drive has not responded in the time allotted. navigate to this website I must use the OLDER version of the diagnostics, so I must go to http://support.wdc.com/product/downl...sid=18&lang=en, but it can only make a bootable floppy disk and I think my floppy drive's heads Drive should be replaced. Re-test 132 Command Error Command Aborted.

Western Digital Diagnostic Error Codes __________________ 12-23-2010, 01:42 AM #3 bwz Registered Member Join Date: Nov 2010 Posts: 170 OS: Windows XP Home makinu1der2, Thanks! have a peek at these guys I'm hoping someone here has had to deal with this before and can give me the straight dope.The drive has never actually worked quite right; I decided it was just unusually ECC is a hardware correction technique that corrects errors. Replace the drive if the error repeats.

message does not appear. Anyway, it won't boot up right, gets to windows basic black screen, or Safe Mode stop at mup.sys area, and stops. Unfortunately, I can't coax any life out of it anymore. http://maxspywareremover.com/western-digital/western-digital-diagnostic-error-0132.php Retest after checking the connections.

For some individuals, dealing with the error is a waste of time that�s why they plan to install a brand new operating system. Then I got my replacement from WD and I was amazed that the drive they sent me had the absolute identical board as my original one. It said : Windows could not start because of a computer disk hardware configuration problem.

Re-test Drive 136 Bad Sector Sector Marked Bad Error.

Retest. Re-test Drive with appropriate diagnostic utility 202 Drive Not Supported Older Western Digital drives are not supported by the diagnostic utility version being used. I took it off my drive and then looked at it and the only thing I seen was it looked burnt a bit on one leg of the MOTOR CONTROL CHIP. Or a BIOS update.

This error can occur on non-Western Digital drives. Check cable & retest. Retest after checking the connections. this content Continue to test or exit the test.

An interrupt command to perform a specific task failed to complete. and S.M.A.R.T. At this point, probably nothing to lose trying it. "Optimism, pessimism, fuck that; we're going to make it happen. tick tick...

Retest after checking the connections. Replace Drive 214 10+ DAM Errors Data Address Mark (DAM) 10+. Replace the drive if the error repeats. Several instances of information on data positioning and location could not be found.

Re-test with appropriate diagnostic utility 228 DRIVE IS LOCKED-DST FAIL Security feature of the drive reports locked status. Replace Drive 456 IDNF 1 Identified Data Not Found. I have a HP computer, can get the specifics if needed. Replace Drive 457 IDNF 2-9 Identified Data Not Found.