Home > Western Digital > Western Digital Data Lifeguard Tools Error Codes

Western Digital Data Lifeguard Tools Error Codes

Contents

Conveyance Self-test supported. Also...please Publish a Snapshot using Speccy - http://www.bleepingcomputer.com/forums/topic323892.html/page__p__1797792#entry1797792 , taking care to post the link of the snapshot in your next post. Replace the drive if the error repeats. I ran the WD diagnostics on the old HDD after it had been reformatted and it came back completely clean, no errors or bad sectors found! weblink

Re-test Drive 213 2-9 DAM Errors Data Address Mark (DAM) 2-9. The same utility and the original code used to lock the drive are necessary to unlock this drive. Replace Drive 357 DAM 2-9 Data Address Mark. So, I downloaded the WD Data Lifeguard Diagnostic software, had to use the one with the ISO Another anyway, can someone please assist me in figuring out what might be happening, https://support.wdc.com/knowledgebase/answer.aspx?ID=11711

Wd Error Codes

At the end of the day the system works now so the sooner I can afford to get a new one and get my data safely onto it the better.Many thanks This is the first time running one of these utilities has actually done something more than just letting me know the drive is dead. In such cases a tool such as HD Sentinel or HDDScan might be a better option.

Replace Drive 214 10+ DAM Errors Data Address Mark (DAM) 10+. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. I'll put the Speccy output in a separate post. drescherjm, Nov 10, 2010 drescherjm, Nov 10, 2010 #3 (You must log in or sign up to reply here.) Show Ignored Content Your name or email address: Do you already have

SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Western Digital Error Code 0007 Re-test Drive with appropriate diagnostic utility 204 Missing Log File The log file that existed at startup of diagnostic utility has been moved or no longer exists. Replace Drive 215 2-9 IDNF Errors Identified Data Not Found (IDNF) 2-9. website here If the error repeats, replace the drive.

The drive should now be defect free." It would be nicer if it would specifically mention what the error(s) are/were. HD - laptop backup) (Fixed) (Total:465.73 GB) (Free:345.22 GB) NTFS 5 Drive f: (Win XP partition) (Fixed) (Total:146.48 GB) (Free:114.9 GB) NTFS ========================= Users: ======================================== User accounts for \\JNCS-STUDY Administrator ASPNET There may be repairable media errors on a platter. Retest after checking the connections.

Western Digital Error Code 0007

Please ensure that you are using the version of diagnostic utility corresponding to either newer or older Western Digital drives. Supports SMART auto save timer. Wd Error Codes I used SeaTools (it was a Seagate drive) and had the same issue. Data Lifeguard Diagnostic For Dos This may be an anomaly or a defect with the drive.

And, if that is the only problem, are you willing to do the Zero Fill and data restoration to "fix" it, knowing that the HDD's reliability is questionable?Hah! have a peek at these guys ReplaceDrive 580 Missing Interrupt An interrupt request failed during the test process. Replace the drive if the error repeats. The drive has to be replaced. Western Digital Support

When running a systems image it crashes requesting Chkdsk. Please re-test the drive with Data Lifeguard. Replace the drive if the error repeats. check over here Actually, you can NOT repair those sectors, but you may be able to permanently make them invisible, and hope that no more develop.

This error may also be related to memory issues. If you encounter the same error code more than once after restesting, create an RMA (see "Enter & Print RMA Information" on page 14). Re-Test Drive 17 Erase SSD Failure A write command during the test has failed.

Re-Test Drive 108 Seek Not Complete A Seek command did not complete in the time allotted.

Replace the drive if the error repeats. It also may be due to a defective connection. Anyway, it won't boot up right, gets to windows basic black screen, or Safe Mode stop at mup.sys area, and stops. Re-test Drive 201 Non-WD Drive The drive does not have a WD serial number.

The drive has to be replaced. In fact these tools produce a much more comprehensive SMART report than DLG. Replace the drive. this content Generated Tue, 01 Nov 2016 09:22:30 GMT by s_mf18 (squid/3.5.20) Sign In Upload Page of 21 Go Download Table of ContentsContents Print This PagePrint ShareShare Url of this page: HTML Link:

Roger ---------------------------- smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-xp-sp3] (sf-5.43-1) Copyright © 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Black Device What is going on. Re-Test Drive 106 Track 0 Error Track 0 was not properly detected. No Errors 0001-0015 SMART Error Self-Monitoring, Analysis, and Reporting Technology (SMART) Error returned during SMART Status/Self Test Command.

But based on what you've said, and the results I got from the WD Diagnostics utility, I think it would be the wisest option to save up a bit longer and If the error repeats, replace the drive. Extended self-test routine recommended polling time: ( 100) minutes. Replace Drive 208 SMART status failed after the media scan.

When it is done and you Partition the HDD and then run a Full Format on it under Windows, there will be no "Bad Sectors" discovered by Windows, and its own The snag comes when you leave it off for awhile or have a power surge or loss or it doesn't boot up right somehow....that's where havoc sets in. Drive should be replaced. This may be a drive issue, however it may be related to a defective connection.

Check cabling and retest. This may be due to a media error. Computers with S.M.A.R.T. Replace Drive 225 Too Many Errors Found Error count reached a threshold value.

Drive should be replaced. Re-Test Drive 356 DAM 1 Data Address Mark. Replace Drive 584 Diag Command Error During a Quick Test, the sefl-test failed.