This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Replace the drive if the error repeats. Replace. After many hours the utility completed, reported errors and wanted to perform a repair operation and completed with code 0223. weblink
Re-test Drive with appropriate diagnostic utility 133 Illegal ID FW overlay not found. It also may be due to a defective connection. Replace the drive.
Replace drive if unable to correct error 118 DAM Error Data Address Mark (DAM) Error. Replace the drive if the error repeats. Re-test Drive 206 Memory Allocation Error Unable to allocate memory for program structures. I backed up the contents of the drive to another system and booted up dlgdiag and did an extended test.
An onboard defect counter has determined the drive has too many errors and should be replaced. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. It may also happen when the wrong version of diagnostic utility is used. https://hardforum.com/threads/wd-diagnostics-error-code-223.1300005/ It also may be due to a defective connection.
moon1 2011-03-15 13:38:52 UTC #11 any time;) acrufox 2011-03-21 15:34:54 UTC #12 Interesting. Public Mobile $40 - 4gb LTE [CanadianBroadband] by rainor94322. Retest. Replace Drive 214 10+ DAM Errors Data Address Mark (DAM) 10+.
Re-test Drive 201 Non-WD Drive The drive does not have a WD serial number. https://community.wd.com/t/error-0132-and-using-proper-wd-data-lifeguard-diagnostic/14904 This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Re-test Drive 206 Memory Allocation Error Unable to allocate memory for program structures. Drive should be replaced.
disabling AHCI or whatever). http://maxspywareremover.com/western-digital/western-digital-diagnostics-error-codes.php At least ten ECC errors have been detected. Replace the drive if the error repeats. Please re-test the drive with Data Lifeguard.
Re-Test Drive 106 Track 0 Error Track 0 was not properly detected. Re-Test Drive 102 Seek Timeout A Seek command did not complete in the time allotted for its completion. This may be due to a media or read/write error. check over here Replace the drive if the error repeats.
Check cabling and retest. drescherjm, Nov 10, 2010 drescherjm, Nov 10, 2010 #3 (You must log in or sign up to reply here.) Show Ignored Content Your name or email address: Do you already have Replace Drive 225 Too Many Errors Found Error count reached a threshold value.
Thanks! Return to WDC.com WD Community Contact Us English Product Support My CloudMy BookMy PassportWD Elements & WD TVInternal DrivesWDLabsLegacy & Other Products Downloads WD Software Product Firmware Product Downloads Warranty & I don't really trust the drive because I already lost one file to it, and the drive seems unwilling to set the problem sectors aside. According to to western digital's site: 223 Errors Repaired Errors found, but have been repaired successfully.
Several instances of information on data positioning and location could not be found. Re-test Drive 136 Bad Sector Sector Marked Bad Error. This may be due to a media error. this content The drive has not responded back in the time allotted.
There may be repairable media errors on a platter. It also may be due to a defective connection. Re-Test Drive 100 Errors Found A Read or Write command during the test has failed. Re-Test Drive 105 BUSY GLITCH The drive did not properly respond to test commands.
This may be due to an internal error or to a failed connection which did not allow the interrupt command to be sent to the drive properly. I proceeded to long format the drive and copy the contents back to the drive. Check cabling and retest.