Back to top #5 James Litten James Litten ┐Ԁǝǝ˥q BC Advisor 1,928 posts OFFLINE Gender:Male Location:New Jersey Local time:04:25 AM Posted 16 February 2013 - 03:24 PM Hi It Re-Test Drive with latest diagnostic utility 117 Uncorrectable ECC Error Uncorrectable Error Correction Code (ECC) Error. Check cabling & retest. ECC is a hardware correction technique that corrects errors. weblink
So I did, and it booted fine. Check cabling & retest. It also may be due to a defective connection. There were too many errors found on this drive to be repaired. click for more info
Drive should be replaced. Perfect for Internet, Not for heavy usage or gaming however. Replace Drive 210 Self Test Incomplete SMART Self Test failed to complete (e.g. -- timed out). Re-Test Drive 8 Read Sector Failure A Read command during the test has failed.
Re-Test Drive 258 ECC 10+ Error Correction Code. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. SERVO is data on track location. At least ten ECC errors have been detected.
This error may have internal and external reasons. Apr 25, 2008 #1 Rakinos [H]ard|Gawd Messages: 1,520 Joined: Jul 31, 2001 So I'm trying to fix a computer, that "stopped working" (endless reboot loop @ windows loading screen) when the Replace Drive 256 ECC 1 Error Correction Code. great post to read Drive should be replaced.
Re-Test Drive 556 SERVO 1 SERVO is data on track location. That is because most Windows systems use 4k as the smallest unit of disk measure (a cluster) and the bad sector (which is only .5k) is in that 4k cluster. This error may also appear if the floppy has been infected by a hidden virus. Re-Test Drive 101 Unknown Error An unknown error has occurred during testing.
A clicking noise can indicate that this error has occurred. http://answers.microsoft.com/en-us/windows/forum/windows_8-update/test-error-code-08-error-was-detected-while/5398a7cd-7a05-492c-9172-796aecebcc9d Replace Drive 200 Drive Not Tested Supported WD drives are initialized with this status. As a guest, you can browse and view the various discussions in the forums, but can not create a new topic or reply to an existing one unless you are logged Replace Drive 216 10+ IDNF Errors Identified Data Not Found (IDNF) 10+.
The Identify Drive Command has not received an acceptable response from the drive. have a peek at these guys Re-Test Drive 108 Seek Not Complete A Seek command did not complete in the time allotted. Check cabling & retest. Retest after checking the connections.
Replace Drive 208 SMART status failed after the media scan. All Rights Reserved. Replace drive if unable to correct error 118 DAM Error Data Address Mark (DAM) Error. http://maxspywareremover.com/western-digital/western-digital-diagnostics-error-0226.php Check connections and retest.
Several instances of track information could not be found. Re-test the drive with Data Lifeguard. The time now is 02:25 AM. -- Mobile_Default -- TSF - v2.0 -- TSF - v1.0 Contact Us - Tech Support Forum - Site Map - Community Rules - Terms of
Computers with S.M.A.R.T. Continue to test or exit the test. Please ensure that you are using the version of diagnostic utility corresponding to either newer or older Western Digital drives. Replace the drive if the error repeats.
It doesn't have any problems with its functionality. Replace the drive. Replace drive if unable to correct error 120 Unknown Error An unknown error has occurred during testing. http://maxspywareremover.com/western-digital/western-digital-diagnostics-error-code-223.php Re-test Drive 213 2-9 DAM Errors Data Address Mark (DAM) 2-9.
Roger ---------------------------- smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-xp-sp3] (sf-5.43-1) Copyright © 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Black Device To run in ATA 66 and ATA100 rates, an Ultra ATA 80 -conductor cable must be used. Did several high-level formats and still no dice. Ran the WD Data Lifeguard (DLG) from Ultimate Boot CD v5.0.2 and found nothing on Quick test, but found something on Extended test, repaired it and gave error code of 0223.
Re-Test Drive with latest diagnostic utility 117 Uncorrectable ECC Error Uncorrectable Error Correction Code (ECC) Error. WD SMARTWARE TESTS :: Quick SMART Status :: PASSEDQuick Drive Test :: PASSEDComplete Drive Test :: PASSED Windows Data Lifeguard Diagnostics´╗┐ TESTS :: Quick Test : PASSED So, what am i Replace the drive if the error repeats. Error: (10/03/2014 08:24:02 PM) (Source: ESENT)(User: ) Description: wuaueng.dll3752SUS20ClientDataStore: F:\WINDOWS\SoftwareDistribution\DataStore\Logs\edb.log-1032 (0xfffffbf8) Error: (10/03/2014 08:24:02 PM) (Source: ESENT)(User: ) Description: wuauclt3752F:\WINDOWS\SoftwareDistribution\DataStore\Logs\edb.log-1032 (0xfffffbf8)32 (0x00000020)The process cannot access the file because it is being
If the error repeats, replace the drive. The cable is loose, broken, or not plugged in. Retest. Re-Test Drive 108 Seek Not Complete A Seek command did not complete in the time allotted.
Replace Drive 587 Bad Sector The previous relocation of a sector has failed. If the error repeats, replace the drive. Drive should be replaced. Replace the drive if the error repeats.
Re-test Drive 206 Memory Allocation Error Unable to allocate memory for program structures. Ten or more instances of information on data positioning and location could not be found. Retest. Re-test Drive with appropriate diagnostic utility 202 Drive Not Supported Older Western Digital drives are not supported by the diagnostic utility version being used.