It also may be due to a defective connection. Retest the drive with Data Lifeguard. It is also possible to see this error on defective Western Digital drives. or maybe your power supply. https://support.wdc.com/knowledgebase/answer.aspx?ID=11711
The command set to be executed has timed out. Drive should be replaced. Replace your cable and retest. Drive should be replaced.
Please ensure that you are using the appropriate version of diagnostic utility. GTX 680 High temps $1200 for 1 of these 3 options [SOLVED] Internal HD Used as External HD Job interview Clinton's (hacked) e-mail Server Video streaming on smarttv No WMA both I've been unable to boot the Gateway. Re-test Drive 142 TK-TK SEEK ERROR Error encountered during track-to-track seek.
Check connections and retest. Western Digital Error Code 0007 Replace the drive if the error repeats. ECC is a hardware correction technique that corrects errors. http://club.myce.com/f138/western-digital-cable-test-failed-265602/ Drive should be replaced.
and S.M.A.R.T. Try version 1.2.1 instead. The drive may not have been accessed properly possibly due to a bad connection. Re-test Drive 141 UNKNOWN ERROR An unknown error has occurred during testing.
It also may be due to a defective connection. https://hardforum.com/threads/wd-diagnostics-error-code-223.1300005/ If your music, data, whatever files are important to you, you will back them up. Western Digital Error Code 0225 Here are some other situations that will fail with different error codes: A request for a storage unit that no longer exists will generate a Status 219. A request for a Western Digital Error Code 0223 Re-Test Drive 2 SMART Attribute Over Threshold Self-Monitoring, Analysis, and Reporting Technology (SMART) threshold exceeded condition.
SERVO is data on track location. have a peek at these guys What about in a computer with XP Home in it? Please ensure that you are using the proper version of diagnostic utility. Drive should be replaced.
Re-Test Drive 102 Seek Timeout A Seek command did not complete in the time allotted for its completion. Re-test Drive 201 Non-WD Drive The drive does not have a WD serial number. Re-Test Drive 556 SERVO 1 SERVO is data on track location. http://maxspywareremover.com/western-digital/western-digital-error-code-120.php Is it safe to do that?
Replace Drive 214 10+ DAM Errors Data Address Mark (DAM) 10+. At least ten ECC errors have been detected. Replace Drive 13 Failed to Repair Sector A test failed to repair bad sectors.
To run in ATA 66 and ATA100 rates, an Ultra ATA 80 -conductor cable must be used. This may be due to a defect with the drive or a bad connection. Or is it possible that there is some sort of cable error, but it's not sufficient problem to stop data being read from the drive in Windows?! Replace the drive if the error repeats.
Retest. Re-Test Drive 116 IDNF Error Address Not Found Error. Replace Drive 207 SMART status failed before the media scan. this content An onboard defect counter has determined the drive has too many errors and should be replaced.
In order for S.M.A.R.T. Re-test Drive 143 RANDOM SEEK ERROR Error encountered during random seek. One instance of information on data positioning and location could not be found. How do i get my data off, safely?
Replace the drive if the error repeats. There may be repairable media errors on a platter. Check cable and retest. Next remember data you do not have at least two copies of is data you do not care about.
The failure to complete the test indicates a failed drive. This may be due to a media or read error. Replace drive if unable to correct error 118 DAM Error Data Address Mark (DAM) Error. He had a 320gig drive so there should not be a windows problem.
Re-Test Drive 121 Servo Error Servo error. The drive may not have been accessed properly possibly due to a bad connection. I really need to get some data off of the HDD as i got lots of school work and notes on there....worst part i have a test tomorrow on lots of It also may be due to a defective connection.
Help ASAP! Re-test Drive 145 FULL STROKE ERROR Error encountered during full stroke seek. This way if there is a problem with the drive, it takes all of a few min to restore an image backup. They are probably still there somewhere: http://forums.techguy.org/windows-7/919730-fixing-recovered-good-ntfs-data.html#post7354512 I was able to recover all of the orphaned files, actually branches, by searching the file system with wildcards (*.* etc.) and tracking back
Replace Drive 213 2-9 DAM Errors Data Address Mark (DAM) 2-9. Re-test Drive 201 Non-WD Drive The drive does not have a WD serial number.