Home > Western Digital > Western Digital Error Code 0220

Western Digital Error Code 0220

The problem with password protected things is you have to know the password, and often you don't need it for a long time, so it's easy to forget.Click to expand... Retest. Re-Test Drive 109 DRQ WAS SET The drive did not properly respond to test commands. Is there a problem you're having? weblink

It also may be due to a defective connection. partition/format it), and then shut down the OS cleanly. I have tried two and one told me the error code and the other couldn't see the disk. Replace drive if unable to correct error 120 NO DRIVE FOUND Cannot communicate with drive. https://forums.anandtech.com/threads/western-hdd-error.1531047/

The command set to be executed has timed out. Go right back into the Manage ASZ. 6. Retest.

I tried to run the restore process again and this time TI reported the new WD drive was exactly same size as my old drive, 60GB. Replace the drive if the error repeats. Drive should be replaced. This may be due to a media error.

Track 0 also holds information about the drive. Re-test Drive 148 Not Selected Drive not selected. If the data is truly unimportant then you will have to say a tearful farewell to this drive. No Errors 101 Unknown Error An unknown error has occurred during testing.

Extended self-test routine recommended polling time: ( 231) minutes. Replace the drive if the error repeats. the WD utilities just zeros out and formats the drive. Re-test Drive with appropriate diagnostic utility 205 Aborted By User Test was aborted by the user (Alt-X pressed during a test).

This is not a terribly easy procedure if you are not comfortable with electronics. by ktony › In Win Case, Black (303 BLACK) by Duality92 › RockIt Delidder by Duality92 › Corsair Hydro Series H55 Quiet CPU Coolers by AyyMD › Aodin Mini Smart Android Re-Test Drive 11 Cable Test Failed Failure during cable test. If ECC occurs, use Data Lifeguard repair option for additional error correction.

There are too many errors detected on this drive to be repaired. http://maxspywareremover.com/western-digital/western-digital-error-code-120.php At least ten errors have been detected. This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Replace Drive 223 Errors Repaired Errors found, but have been repaired successfully.

AND some MBR utilities. This may be due to a media or read/write error. This may be an anomaly or a defect with the drive. check over here An onboard defect counter has determined the drive has too many errors and should be replaced.

The Identify Drive Command has not received an acceptable response from the drive. To run in ATA 66 and ATA100 rates, an Ultra ATA 80 -conductor cable must be used. If the error repeats, replace the drive.

And here is what 3ware says.

Any one got any ideas how I can fix this? please help. Have you tried other companies' Hard Drive diagnostics? You may also want to reroute your IDE cable away from sources of electronic bus noise such as your CPU, Power Supply, etc.

This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Some vendors use the security feature to ensure the usage of only specific drives in their system, or the drive may have been locked by a user using a third party Yes, my password is: Forgot your password? this content But in other Raid Setups to.

This error occurs when the drive could not read Track Zero. Awesome! Le Main Rig (17 items) For Sale: 1m SAS Cables (SFF-8087 to SFF-8087) $5 (USD) CPUMotherboardGraphicsRAMi7-6700KAsus Sabertooth Z170 Mark 1Gigabyte GTX 960 WindForce 2X OCG.SKILL Ripjaws How to grep rows that have certain value in a specific column? Reread first post.

Replace Drive 225 Too Many Errors Found Error count reached a threshold value. Drive should be replaced. It applies a password to the HDD itself so that if it's removed, it can't be plugged into another system and have the data accessible. Some vendors use the security feature to ensure the usage of only specific drives in their system, or the drive may have been locked by a user using a third party

Try putting 200 on Pri 1 master with no jumper and see what happens SacsTC, Aug 23, 2005 #4 Outsdr Thread Starter Joined: Jul 23, 2004 Messages: 8 SacsTC said: It also would not remove the lock, as that is likely stored in on-board flashrom... Retest after checking the connections. ECC is a hardware correction technique that corrects errors.

Check cabling & retest. No mentions of the HDD password. What is going on? Replace the drive.

Replace the drive if the error repeats. Nick ManageComm, Inc. Top Dmitry Postrigan Post subject: Re: Locked Hard DrivePosted: February 11th, 2009, 19:33 Joined: September 27th, 2005, 8:21Posts: 757 I guess you can try http://hddunlock.com _________________Dmitry Top The cable is loose, broken, or not plugged in.

Status: Contact System VendorClick to expand... Several instances of track information could not be found. The information file, which holds the data pertaining to this drive, is corrupted or missing.