Home > Western Digital > Western Digital Error Status Code 0120

Western Digital Error Status Code 0120

This issue was posted earlier in this forum but there problem was never solved:  Desktop/Data-Lifeguard-Diagnostic-DOS-major-issue  So the issue seems to be with the ASUS board. Re-test the drive with Data Lifeguard. Re-Test Drive 210 Self Test Failed The drive's internal self-test reported unrepairable errors. The automatic repair feature can attempt a repair if possible. http://maxspywareremover.com/western-digital/western-digital-error-code-0120.php

It also may be due to a defective connection. Drive should be replaced. Replace drive if unable to correct error 118 DAM Error Data Address Mark (DAM) Error. Track 0 on the drive must be accessed to perform parts of various internal tests.

Retest after checking the connections. The automatic repair feature can attempt a repair if possible. Re-Test Drive 101 Unknown Error An unknown error has occurred during testing. johnb35, Jul 7, 2012 #4 celina728 Member Messages: 147 O.K.

Drive should be replaced. Re-test Drive 206 Memory Allocation Error Unable to allocate memory for program structures. This may be due to a media or read/write error. The time now is 04:25 AM.

I'd like to get new a MB,CPU,RAM and DVD/CD but the one I want is on sale,instore only pick up, and the closest store is about 12 hrs. If the error repeats, replace the drive.” This is nonsense. A number of ECC errors (between 2 through 9) have been detected. https://community.wd.com/t/data-lifeguard-diagnostic-for-dos-working-os-but-no-drive-found/15260 Data Lifeguard Diagnostics Error Code ...

Login appeared to work, albeit very slowly, but the freezing happened earlier. Re-Test Drive 8 Read Sector Failure A Read command during the test has failed. Check cabling and retest. One instance of information on data positioning and location could not be found.

I'm truly hoping I'm just a moron. hop over to this website Re-test Drive with appropriate diagnostic utility 202 Drive Not Supported Older Western Digital drives are not supported by the diagnostic utility version being used. Recheck your connections and replace the cable. This error occurs when the drive could not read Track Zero.

The drive is defect free. http://maxspywareremover.com/western-digital/western-digital-error-status-code-007.php I ran both test without any problems. Ten or more instances of information on data positioning and location could not be found. Retest after checking the connections.

away. Check cabling & retest. Re-test with appropriate diagnostic utility 228 DRIVE IS LOCKED-DST FAIL Security feature of the drive reports locked status. check over here I hadn't downloaded any of these as I have been trying to fix one problem at a time.

Replace the drive if the error repeats. If you have only one RAM stick installed......run memtest...1. Some vendors use the security feature to ensure the usage of only specific drives in their system, or the drive may have been locked by a user using a third party

Replace the drive if the error repeats.

The running program will look something like this depending on the size and number of ram modules installed:It's recommended to run 5-6 passes. Check cabling and retest. Test with Gigabyte P35-DS4 motherboard So I tested once again at the Gigabyte P35-DS4-System. X-out to close result window.

The same utility and the original code used to lock the drive are necessary to unlock this drive. nothing. (On screen it said short test took about 5 min.) Couldn't hear cd/dvd running or anything. failure and errors How to test a drive for problems using Data Lifeguard Diagnostics for Windows Where to download software, utilities, firmware updates, and drivers for WD products Processing... http://maxspywareremover.com/western-digital/western-digital-error-0120.php Replace the drive.

This is the pretest initialization code which indicates a drive is ready to be tested, but has not yet been tested. Check the drive connections. Recheck your connections and replace the cable. Re-test Drive 150 UNKNOWN ERROR An unknown error has occurred during testing.

ECC is a hardware correction technique that corrects errors. Archive Top All times are GMT -5. My WebsiteMy help doesn't cost a penny, but if you'd like to consider a donation, click Back to top #3 D808Centaur D808Centaur Topic Starter Members 93 posts OFFLINE Gender:Male Re-test Drive with appropriate diagnostic utility 204 Missing Log File The log file that existed at startup of diagnostic utility has been moved or no longer exists.

If ECC occurs, use Data Lifeguard repair option for additional error correction. The drive has detected an unstable condition, possibly an incorrect spin speed. Re-test Drive If an error code is encountered that is not in the list above, please Contact Us for additional troubleshooting. The drive has not responded in the time allotted.

Next I tried copying "everything" in one go (more than 100GB) but this failed with a couple of read errors.