Home > Western Digital > Western Digital Hard Drive Test Error Codes

Western Digital Hard Drive Test Error Codes

Contents

Replace Drive 225 Too Many Errors Found Error count reached a threshold value. Self-test supported. Replace the drive if the error repeats. Important: Windows Data Lifeguard Diagnostics will test internal hard drives contained within a WD My Book Premium II and WD My Book Pro Edition II storage system. weblink

Contact System Vendor 221 Test Not Supported Certain older drives do not support certain SMART Self Tests. Ran the WD Data Lifeguard (DLG) from Ultimate Boot CD v5.0.2 and found nothing on Quick test, but found something on Extended test, repaired it and gave error code of 0223. Suspend Offline collection upon new command. The drive has not responded in the time allotted.

Wd 08-unable To Repair Bad Sectors

Replace. For both reasons, this is a clear warning that you should replace this HDD soon while you can get a good clone copy made and before data is lost. (I had This error may also be related to memory issues.

How Does a computer get Infected? Offline surface scan supported. One instance of information on data positioning and location could not be found. Western Digital Quick Drive Test Failed Re-Test Drive 7 SMART Offline Immediate Command Failure Self-Monitoring, Analysis, and Reporting Technology (SMART) Offline Immediate command failed.

Re-test Drive 135 DRQ Timeout Timeout from checking Data ReQuest Timeout (DRQ) bit. Western Digital Test Error Code 08- The drive has to be replaced. No. Replace.

Replace Drive 227 SMART Not Supported Self-Monitoring, Analysis, and Reporting Technology (SMART) Certain older drives do not support SMART. Status Code 07 Failure Checkpoint 97 This will make your SATA drive look like PATA. Replace Drive 256 ECC 1 Error Correction Code. If ECC occurs, use Data Lifeguard repair option for additional error correction.

Western Digital Test Error Code 08-

A second boot (Win XP restart) was normal; no error message. page Is there anything that suggests a serious problem with this hard drive? Wd 08-unable To Repair Bad Sectors The automatic repair feature can attempt a repair if possible. Smart Offline Immediately Command Error On Drive 1 Please ensure that you are using the version of diagnostic utility corresponding to either newer or older Western Digital drives.

If the drive is recognized there, than something is likely wrong with either the power supply, or the data port (or BUS) that the drive is being connected to. have a peek at these guys An interrupt command to perform a specific task failed to complete. This may be an anomaly or a defect with the drive. EXTENDED TEST - performs a Full Media Scan to detect bad sectors. Read Smart Attribute Command Error On Drive 2

Several instances of track information could not be found. Check your connections and replace the cable. hlvadgama 2011-08-07 17:06:25 UTC #3 Thank you for the reply. http://maxspywareremover.com/western-digital/western-digital-hard-drive-error-0225.php Re-Test Drive 110 DRQ NOT EXPECTED The drive did not properly respond to test commands.

Please ensure that you are not loading any other DOS level files from the floppy prior to running diagnostic utility. Western Digital Bad Sector Repair This may be an anomaly or a defect with the drive. One instance of track information could not be found.

SCT Data Table supported.

A backup or clone copy on another unit is necessary. (Maybe you feel you already have such a copy - your old HDD.) If you run a Zero Fill on your It also may be due to a defective connection. Please ensure that you are using the version of diagnostic utility corresponding to either newer or older Western Digital drives. Too Many Bad Sectors Detected Using the site is easy and fun.

The diagnostics will not read SMART data from the drives. What do you think of it? I had my WD delivered before 3-4 days. http://maxspywareremover.com/western-digital/western-digital-hard-drive-error-checker.php BUT at some point (a pre-set limit), the SMART system sends out an error message that too many faulty sectors have been replaced.

SCT Feature Control supported. Check cable and retest. Re-test and Repair Option diagnostic utility 212 10+ Uncorr ECC Errors Error Correction Code (ECC) 10+. That is why Data Lifeguard can find and display them, no matter how the BIOS is set.) Your tests say that there are SMART error messages stored.

Drive should be replaced. It also probably shows you more detail about what the SMART errors are, but you have not reported them here. Replace the drive if the error repeats. Make sure the drive is getting power.

This may be due to a defect with the drive or the drive may not have responded properly due to a bad connection. Replace. Thirdly, this process will NOT reset the SMART tables, so the SMART error message of too may Bad Sector replacements will not go away.Armed with this knowledge, you can make some It also may be due to a defective connection.

Privacy Policy Terms of Use Trademarks Select your Language Language 中文(繁體) 中文(简体) Čeština Deutsch English Español Francais ελληνικά Italiano 日本語 한국어 Polski Português РУССКИЙ Türk Jump to content Sign In There were media errors that were within the repair capabilities of diagnostic utility. Replace the drive if the error repeats. Check cable & retest.

So I went back to the PC shop and bought another new SATA cable to reconnect my older HDD back up again, but as soon as I did, it wouldnt boot It also may be due to a defective connection. The Windows version of the Data Lifeguard Diagnostics utility can perform drive identification, diagnostics, and repairs on a Western Digital FireWire, EIDE, Serial ATA, or USB drive. This error can occur on non-Western Digital drives.

Drive should be replaced.